Joseph Ribkoff Sequined Blazer With Satin Lapel
Elevate your party attire with this stylish blazer, intricately made from sequin and highlighted with contrasting satin notched lapel and faux welt pockets.
DETAILS & CARE
- 95% Polyester, 5% Spandex
- Sequin with satin accents
- Satin notched lapel
- Straight sleeves
- Satin faux welt pockets
- Lined
- Do not wash
- Do not bleach
- Do not tumble dry
- Low iron only if needed
- Professional dry clean only
- Do not iron on trim
- Exclusive of trims
- Low iron on reverse side only if needed
SIZE & FIT
- Straight silhouette
- Model is 5'9" . Wearing size 6
Size Guide
Find your JR size based on your body measurements.
Size equivalence per country
| Sizes | XS | S | M | L | XL | XXL | XXXL | ||||||
| 0 | 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 24 | |
| Canada/United States/Mexico | 0 | 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 24 |
| United Kingdom/Australia | 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 24 | 26 |
| Germany | 28 | 30 | 32 | 34 | 36 | 38 | 40 | 42 | 44 | 46 | 48 | 50 | 52 |
| France | 30 | 32 | 34 | 36 | 38 | 40 | 42 | 44 | 46 | 48 | 50 | 52 | 54 |
| Spain | 32 | 34 | 36 | 38 | 40 | 42 | 44 | 46 | 48 | 50 | 52 | 54 | 56 |
| Italy | 34 | 36 | 38 | 40 | 42 | 44 | 46 | 48 | 50 | 52 | 54 | 56 | 58 |
| Japan | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19 | 21 | 23 | 25 | 27 |
Best practices for taking your measurements
Measuring tips
- Use a flexible measuring tape
- Hold on to it firmly and leveled, but not too tightly
A. Bust measurement |
| Measure under your arms, around the fullest part of your chest. |
B. Waist measurement |
| Measure around your natural waistline, keeping the tape slightly loose. |
C. Hip measurement |
| Measure around below your waist, at the fullest part of the lower hip, keeping the tape slightly loos |
![Tecnoseal X11 Shaft Anode - Zinc - 2-1/2" Shaft Diameter [X11]](https://www.canbot.shop/image/tecnoseal-x11-shaft-anode-zinc-2-12quot-shaft-diameter-x11_GVuW6T_300x.webp "Tecnoseal X11 Shaft Anode - Zinc - 2-1/2\" Shaft Diameter [X11]")
